- ATV[1]
- Brake System[2]
- Auto Motor[5]
- Auto Sensors[2]
- Car Amplifiers[1]
- Car Black Box[1]
- Car Cassette Player[2]
- Car Charger[1]
- Car Fridges[1]
- Engine Assembly[3]
- Engine Mounts[2]
- Exhaust System[3]
- New Cars[1]
- Air Conditioning System[1]
- Car Fenders[1]
- Car Grills[2]
- Car Windows[1]
- Car Polishers[2]
- Fuel Additives[2]
- Car Wash Brushes[1]
- Tire Covers[1]
- Motorcycle Shock Absorber[1]
- Other Auto Parts[1]
- Emergency Tools[1]
- Cables[1]
- Camera Filters[1]
- Power Accessories[1]
- Other Electronic Accessories[1]
- Other Electronic Components[2]
- Contact Person : Ms. Xiao Grace
- Company Name : Tianjin Tianyuan Electronic Material Co., Ltd.
- Tel : 86-22-86995521
- Fax : 86-22-86996309
- Address : Tianjin,Tianjin,Science and Technology Area, Beichen District, Tianjin City. China (Yixingbu)
- Country/Region : China
- Zip : 300402
Corona Resistance Polyimide Film
Related Product Searches:Corona Resistance Polyimide Film,High Quality,CR polyimide Film, Film,6051-CR
Corona Resistance Polyimide Film
In addition to the very good performance of high and low temperature resistance, electricity insulativity, radiation and etching resistance, it also has very excellent performance of corona resistance and thermal conductivity. The corona polyimide film applies to turn-insulating, major insulation, external insulation of big coil and corona resistance protective layer of large tractive motor, conversion motor, wind driven generator, special motor etc.
I Type
TY6051-CR corona resistance polyimide film
TY6251-FCR (single side, double sides), painted F46 glue on the surface of the single side or double sides of the corona resistance polyimide film. Slit with different width after drying and rolling.
II Technical requirement
2.1apperance
The color of the corona resistance polyimide film is amber and semi-transparent. The film should be smooth and flat with neat non-torn edges and without any defects such as wrinkles,tears, gels, blisters, bubbles, pinholes and foreign impurities.
III The thickness and its tolerance
Unit:mm
Type | Tolerance | |
TY6051-CR | 0.020-0.040 | ±0.002 |
0.041-0.075 | ±0.004 | |
TY6251-FCR Single side Double sides | 0.030-0.050 | ±0.003 |
0.051-0.100 | ±0.005 | |
Remarks: We can meet your needs of all kinds of specification of corona resistance polyimide film and adhesive tape.
IV width and length
We can meet your needs of different width and length
IIV Performance
Technical requirement
No. | Index | Unit | Value | |||
TY6051-CR | TY6251-FCR Single side | TY6251-FCR Double sides | ||||
1 | Corona resistance period Pulse frequency:20KHz:Pulse rate factor:50%;pulse Wave:square;Polar: bipolar; Vp-p: 2KV;pulse rise time (no-load);500ns;excess Current(alarm cut test): 50MA. Test polor: Φ6mm pillarPolor/flat polor,distance Between up and down polor is The sample thickness 3.5 load of 5 samples, pulse rise time:284-296 ns. | Min | ≥300 | ≥300 | ≥300 | |
2 | Tensile | Mpa | ≥135 | ≥80 | ≥80 | |
3 | Longation | % | ≥40 | ≥40 | ≥40 | |
4 | Rate contraction rate Longitudinal Transverse 150°C,0.5h 400°C,0.5h | % | ≤1.0 ≤3.0 | ≤1.0 ≤3.0 | ≤1.0 ≤3.0 | |
5 | Electrical operating requency intensity | The lowest value | MV/m | ≥200 | ≥120 | ≥100 |
6 | Surface resistivity 200°C | Ω | ≥1.0x1014 | ≥1.0x1014 | ≥1.0x1014 | |
7 | Volume resistivity 200°C | Ω.cm | ≥1.0x1012 | ≥1.0x1012 | ≥1.0x1012 | |
8 | Relative didlectric constant 48Hz-62Hz | - | 3.5±0.4 | 3.5±0.4 | 3.5±0.4 | |
9 | Dielectric loss factor 48Hz-62Hz | - | ≤4.0x10-3 | ≤4.0x10-3 | ≤4.0x10-3 | |
10 | Stripping forcel Single side: adhesive to base Adhesive to copper Double sides: Adhesive to adhesive Adhesive copper | N/CM | ------- | ≥2.3 ≥3.5 | ≥3.5 ≥3.5 | |
Remark: The test method comply to GB/T21707-2008frequency conversion speed regulation special use 3 items asynchronous motors insulation regulation and GB/2726-1996 polyimide film test
Corona Resistance Polyimide Film
